Flexitec 2020 GRP Roofing System by Res Tec

Flexitec 2020 Flexible GRP Roofing System with Full Overlay Capabilities from Res - Tec

Similar to both GRP fibreglass and liquid overlay systems, Flexitec 2020 is rapid-curing, flexible and designed to coat almost all roof surfaces. Use over Felt, Asphalt, Concrete, GRP, PVC Single-Ply, Metal or approved Insulation Board. With this in mind there is no need to strip a roof and allows the installer to simply overlay the existing roof with the Flexitec 2020 System. With its rapid curing abilities and an extra-tough finish, Flexitec 2020 can be walked over in just 30-60 minutes.

Showing 24 of 24 results
  • Flexitec 2020 Resin Dark Grey - Res - Tec

    Flexitec 2020 Resin Dark Grey - Res - Tec

    The Flexitec 2020 System can be laid as a 10 Year System using 1 Fully Reinforced Flexitec Resin Layer or a 20 Year System by applying a second coat of Resin with no additional reinforecement as part of the full Flexitec 2020 Overlay System. Dark Grey
  • Flexitec 2020 Resin Light Grey - Res - Tec

    Flexitec 2020 Resin Light Grey - Res - Tec

    The Flexitec 2020 System can be laid as a 10 Year System using 1 Fully Reinforced Flexitec Resin Layer or a 20 Year System by applying a second coat of Resin with no additional reinforecement as part of the full Flexitec 2020 Overlay System. Light Grey.
  • Flexitec 2020 Powder Hardener 1kg - Res - Tec

    Flexitec 2020 Powder Hardener 1kg - Res - Tec

    Flexitec 2020 Powder Hardener is added to Flexitec 2020 Resin and Primer to begin the curing process. Hardener is added at between 2% and 4%, which is means between 2 to 4 scoops of powder hardener per litre of product.
  • Flexitec 2020 Primer - Res - Tec

    Flexitec 2020 Primer - Res - Tec

    Flexitec 2020 Primer is recommended for all porous, bituminous, timber and PVC single ply substrates.
  • Flexitec 2020 Primer Accelerator (400g)

    Flexitec 2020 Primer Accelerator (400g)

    This Accelerator speeds up the pot life and cure time of the Primer in cold weather. The Accelerator is added to a tin of Primer and stirred in before adding the usual amount of catalyst.
  • RESGRIP Non Slip Coating - 10kg

    RESGRIP Non Slip Coating - 10kg

    RESGRIP is a hybrid MMA anti-slip coating suitable for a range of trafficked applications. The anti-slip aggregate is pre-dispersed within the liquid making for an extremely quick and easy application. Compatible with Restec 2020 Primer and Catalyst
  • Flexitec CSM Rolls -  225g Various Sizes

    Flexitec CSM Rolls - 225g Various Sizes

    Flexitec 225g chopped strand matting is designed to be incorporated into the first coat of the Flexitec 2020 Resin. This consistent matting provides strength to the system and allows for an even coverage rate.
  • Flexitec CSM Bandage / Tape 225g - 75mm x 18m

    Flexitec CSM Bandage / Tape 225g - 75mm x 18m

    Flexitec Taping Mat is a form of fibreglass bandage made up of 25-50mm fibreglass strands bonded together with a styrene-soluble binder, which would then dissolve when the CSM is applied on top of the Flexitec Primer and then coated with the Flexitec Resin.
  • Flexitec 2020 10sqm Roofing Kit

    Flexitec 2020 10sqm Roofing Kit

    Flexitec 2020 Flexible GRP Overlay Roofing System 10m Kit from Res Tec. Use over Felt, Asphalt, Concrete, GRP, PVC Single-Ply and OSB3. Kit Includeds everything to complete a 10sqm Roofing Project.
  • Res Tec SA Carrier Layer - 13.8sqm

    Res Tec SA Carrier Layer - 13.8sqm

    The Res Tec SA Carrier Layer provides a cost-effective alternative to timber deck warm roofs. The self-adhesive membrane can be applied directly to bonded insulation boards, without the need for mechanical fixings. 13.8sqm
  • SA Carrier Layer Primer

    SA Carrier Layer Primer

    The SA Carrier layer Primer is used exclusively as a primer on which the SA Carrier Layer is laid. It provides the needed adhesion between the substrate and the Carrier Layer.
  • Barn Owl Blend Aggregate - 25kg

    Barn Owl Blend Aggregate - 25kg

    Barn Owl Blend Aggregate. Part of the Flexitec Balcony and Walkway System These coloured Aggregates provide a Durable and Attractive Finish to any walkway or balcony.
  • Bayside Blend Aggregate - 25kg

    Bayside Blend Aggregate - 25kg

    Bayside Blend Aggregate. Part of the Flexitec Balcony and Walkway System These coloured Aggregates provide a Durable and Attractive Finish to any walkway or balcony.
  • Harvest Blend Aggregate - 25kg

    Harvest Blend Aggregate - 25kg

    Harvest Blend Aggregate. Part of the Balcony and Walkway System These coloured Aggregates provide a Durable and Attractive Finish to any walkway or balcony.
  • Hillside Blend Aggregate - 25kg

    Hillside Blend Aggregate - 25kg

    Hillside Blend Aggregate. Part of the Flexitec Balcony and Walkway System These coloured Aggregates provide a Durable and Attractive Finish to any walkway or balcony.
  • Mist Blend Aggregate - 25kg

    Mist Blend Aggregate - 25kg

    Mist Blend Aggregate. Part of the Flexitec Balcony and Walkway System These coloured Aggregates provide a Durable and Attractive Finish to any walkway or balcony.
  • Vineyard Blend Aggregate - 25kg

    Vineyard Blend Aggregate - 25kg

    Vineyard Blend Aggregate. Part of the Flexitec Balcony and Walkway System These coloured Aggregates provide a Durable and Attractive Finish to any walkway or balcony.
  • Flexitec Balcony Sealer - 10 litres

    Flexitec Balcony Sealer - 10 litres

    Flexitec Balcony Sealer for Balconies and Walkways. The sealer is a High Performance PMMA Finishing Resin which provides a very hard wearing finish that can accommodate heavy foot traffic.
  • 300g Chopped Strand Matting (1oz)

    300g Chopped Strand Matting (1oz)

    Chopped Strand Matting made from chopped strands of e-glass bound with an emulsion binder soluble in styrene. This makes it perfectly suitable with Polyester Resins in Boat Building and Flat Roofing. 110 metre roll.
  • 18mm OSB3 Sterling Board - Tongue and Groove

    18mm OSB3 Sterling Board - Tongue and Groove

    COLLECTION ONLY PRODUCT - OSB3 Sterling Board - Tongue and Groove 18mm 2400mm x 600mm. Used extensively and recommended for Fibreglass Flat Roof Installation as the preferred substrate.
  • Metal Detailing Primer 250ml

    Metal Detailing Primer 250ml

    A single component, quick drying, air-curing primer to be used when applying Flexitec system to a metal surface. Ideal for small areas of metal.