Mould Preparation

Full range of Mould Preparation and Release Products. If you are unsure about the correct product please call Technical Support for free advice on your project.
Showing 20 of 20 results
  • Plastalin Modelling Clay Bars - Plasticine

    Plastalin Modelling Clay Bars - Plasticine

    Plastalin is a non-drying, non-setting modelling material. It is virtually identical to plasticine, and can be re-used many times. Plastalin is sufficiently pliable to make a wide variety of models, but is firm enough to retain its shape indefinitely.
  • Soft Filliting Wax - Nakiplast Wax 650g

    Soft Filliting Wax - Nakiplast Wax 650g

    Recommended as a joint filler or alternatively rolled out as sheet wax. Workable at room temperature. Utilised to create exact radii in moulding processes.
  • Filleting Spheres - Set of 6

    Filleting Spheres - Set of 6

    Filleting Spheres used to radius 90 degree edges in the production and Filleting of Moulds and Plugs. Normally used in conjunction with Wax and Plasticene.
  • Crystic Primecoat

    Crystic Primecoat

    Crystic Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF and GRP Mould Preparation.
  • Crystic Glosscoat 5kg

    Crystic Glosscoat 5kg

    Crystic Glosscoat is a polyester coating designed to be applied over prepared Crystic Primecoat to give a glossier and more durable surface. Used extensively in Mould Preparation.
  • R5 Wax Based Aerosol Release Agent

    R5 Wax Based Aerosol Release Agent

    R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface.
  • R7 Release Agent

    R7 Release Agent

    R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface.
  • Slick Release Wax

    Slick Release Wax

    Slick wax mould release is a blend of high performance agents and carnauba wax. Easy to apply, long lasting and paerfect for new and old moulds. Get more releases per applictions, less wax build up and better moulding finishes.
  • Resin Barrier / Release Tape 50mm

    Resin Barrier / Release Tape 50mm

    High quality release tape designed specifically for use as a barrier or release tape for polyester or epoxy resin. Totally non stick to resin this tape is smooth, strong and will not stretch. The perfect non stick surface.
  • Frekote FMS Mould Sealer

    Frekote FMS Mould Sealer

    Loctite Frekote Mould Sealer (FMS) is formulated specifically as a sealer for fiberglass reinforced polyester, epoxy and other composite moulds commonly used in the fiberglass moulding industry.
  • Frekote FREWAX 5ltr

    Frekote FREWAX 5ltr

    Frekote FREWAX is a semi-permanent polymer based release agent with easy application and complete mould coverage. It provides a high gloss finish and multiple releases per application. It has a 10 minute cure time and low odour.
  • Frekote PMC Mould Cleaner - 5 Litre

    Frekote PMC Mould Cleaner - 5 Litre

    Loctite Frekote PMC is a special blend of solvents designed to dissolve and remove wax from polyester moulds without dulling the surface. PMC can also be used to clean epoxy and metal mould surfaces as well as for cleaning brushes and equipment.
  • Lint Free Multi Cloth by Smartora x 150 Sheets

    Lint Free Multi Cloth by Smartora x 150 Sheets

    Smartora Multi Cloth is made from hydroentangled fibres that make for a very strong, light, soft and highly absorbent lint-free dry wiper. Perfect for cleaning and preparation of Fibreglass Moulds with Lint Free finish.
  • Loctite Frekote 700 NC 5 ltr

    Loctite Frekote 700 NC 5 ltr

    LOCTITE FREKOTE 700NC is a clear, solvent-based, moisture-curing release epoxy for most advanced composites and also polyester resins.
  • Loctite Frekote 770 NC 5 ltr

    Loctite Frekote 770 NC 5 ltr

    LOCTITE FREKOTE 770NC is a clear, solvent-based, moisture-cured, epoxy mould release agent for advanced composites and FRP polyester parts.
  • Loctite Frekote WOLO - 5 ltr

    Loctite Frekote WOLO - 5 ltr

    Loctite Frekote WOLO is a unique polymer release agent that cures quickly and provides multiple release of all polyester resins. Application and use of a release agent has never been easier, simply wipe on and leave on to produce a high gloss finish with no need to polish.
  • Mirror Glaze Release Wax Meguiars No.8

    Mirror Glaze Release Wax Meguiars No.8

    Meguiars Mirror Glaze M-08 Mould Release Wax has been rebranded to Miracle Gloss but is the very same tried and tested release wax Mirror Glaze that we all know and love.
  • PVA Release Agent

    PVA Release Agent

    PVA is a traditional mould release agent (not the same as PVA glue!) and can be wiped on or sprayed onto a wide range of pattern and mould surfaces to provide a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites.
  • Sheet Wax - High Temperture 601mm x 305mm

    Sheet Wax - High Temperture 601mm x 305mm

    High temperature sheet wax - self-adhesive sheet wax used to create material thickness difference between a pattern and mould in tooling and casting projects. Sheets are is 601 x 305mm. Available in 1mm, 2mm and 4mm thicknesses.

  • Tack Cloth - 10 Pack

    Tack Cloth - 10 Pack

    Tack Cloth - 10 Pack. Designed to Pick up and holds sanding residue, dirt and dust. Enables optimum paint and gelcoat adhesion to surfaces. Ideal for cleaning paintwork after sanding and prior to the application of adhesives, paints and polyester resins and gelcoats.